Multi Mould Washing Machine
This machine is used for the washing of multi moulds. Preferably they are heated with steam. It is composed of 4 units as pre-washing in unit 1. , washing in unit 2. , prerinsing in unit 3. , final rinsing in unit 4. There is IP 65 class electrical board providing temperature and speed control. All sections excluding final rinsing section are filtered. Receiver provides final rinsing water to be pumped from the mains in 3 bars with 1500 lt/h capacity.
Capacity: 200-300 mould (mould depends on the density of dirt)
Water Consumption: 1500 lt/h
Steam Consumption: 400 kg/h - 3 Bar
Electric Energy Consumption: 30,05 KW
Pre-Washing
In this unit, mould is swept leaving no approximate surface with 64 imported stainless nozzle with 15,3 lt/min flow rate at 3 bars pressure. Pump feeding this chamber has 11 KW power. In this section, 58.750 lt/h water is used for total clased circulation.
Washing
In this unit, mould is washed with 55 °C - 65 °C solution without leaving any nonswept surface with 64 imported stainless nozzle arms with 15,3 lt/min flow rate at 3 bars pressure. Pump feeding these nozzle groups has 11 KW power. In this section, 58.750 lt/h solution is used for closed circulation.
Pre-Rinsing
In this unit, mould is swept leaving no approximate surface with 56 imported stainless nozzle with 15,3 lt/min flow rate at 3 bars pressure. In this section, 51.400 lt/h water is used for closed circulation. Water used in this section is consumed in pre-washing chamber. Pump feeding these nozzle groups has 7,5 KW power.
Final Rinsing
In this unit, mould is swept without leaving any non-swept surface with 28 imported stainless nozzle with 0,9 lt/min flow rate at 3 bars pressure. Nozzles in this unit are feed by mains water. Total of 0,9 lt/min water at 2 bars or 1500 lt/h water is used. This is the total water consumption of the machine.
